Before you bring home the Cuisinart TOA-60 air fryer, you need to know exactly how much space this countertop powerhouse requires. Many enthusiastic buyers discover too late that their dream appliance won’t fit their kitchen layout, forcing them into the hassle of returns or awkward rearrangements. The Cuisinart air fryer dimensions and size specifications reveal a countertop unit measuring precisely 16 inches wide, 15.5 inches deep, and 14 inches tall—measurements that could make or break your kitchen configuration.
This versatile appliance delivers impressive cooking capacity but demands careful spatial planning. At 21 pounds, it’s not something you’ll casually move around, so getting the dimensions right before purchase is critical. Whether you’re cooking for a family of four or seeking a multi-functional kitchen workhorse, understanding the exact Cuisinart TOA-60 dimensions prevents costly mistakes and ensures seamless integration into your daily routine. Let’s break down every measurement you need to know for perfect placement.
Exact TOA-60 Dimensions That Determine Counter Fit
Your counter space needs precise measurements before committing to this appliance. The Cuisinart TOA-60 occupies a rectangular footprint that must fit within your available kitchen real estate without compromising functionality.
Counter Space Requirements You Must Measure
Grab your tape measure and verify these critical dimensions:
– Width: 16 inches (40.6 cm) side-to-side—wider than most microwaves
– Depth: 15.5 inches (39.4 cm) front-to-back—deeper than standard toaster ovens
– Total footprint: 248 square inches of dedicated counter space
This footprint equals approximately 1.7 square feet—enough space to accommodate the appliance itself plus necessary clearance zones. Critical tip: Measure your available space with the door closed first, then account for additional depth when the door opens.
Vertical Clearance Needs Under Cabinets
The TOA-60 stands 14 inches tall, but cabinet clearance requires more consideration:
– Minimum under-cabinet height: 14 inches for the unit itself
– Recommended clearance: 20 inches total (14″ unit + 6″ ventilation space)
– Safety note: The stainless steel top gets warm during extended cooking cycles
Pro tip: If your cabinets sit exactly 14 inches above the counter, the TOA-60 will physically fit but may trigger overheating protection during long cooking sessions due to insufficient heat dissipation space.
Weight and Portability Facts That Affect Placement
At 21 pounds, the TOA-60 functions as a semi-permanent countertop fixture rather than a portable appliance. This weight distribution impacts where you can realistically position it:
- Stainless steel housing: Contributes most of the weight for durability
- Internal components: Heating elements and fan assembly add substantial heft
- Glass door: The tempered glass viewing window significantly increases overall mass
Moving strategy: Always allow 30-45 minutes for complete cooling before relocation. Empty all accessories first, then lift slightly at the front to slide across countertops—never drag the appliance, as this can damage both the unit and your counter surface.
Interior Cooking Capacity Beyond Exterior Dimensions
The TOA-60 maximizes internal space despite its compact exterior footprint. Understanding the usable cavity dimensions helps you plan meals effectively:
Usable Interior Space Measurements
- Width: 13.5-14 inches between side walls—perfect for standard baking pans
- Depth: 12-13 inches front-to-back on the rack—accommodates most pizza sizes
- Height: 7-8 inches between lower rack position and heating elements
This clever design allows the TOA-60 to handle family-sized portions while maintaining a relatively compact exterior. Key consideration: The 6-pound maximum food load rating applies specifically to air frying—baking and roasting can accommodate slightly larger items when using the wire rack.
Real-World Food Capacity Examples
- Toast: 6 standard slices simultaneously without crowding
- Pizza: 12-inch diameter fits perfectly on the provided rack
- Chicken: 4-pound whole bird (spatchcocked for optimal airflow)
- Wings: 3 pounds in single layer for perfectly crispy results
Pro tip: For best air frying results, never exceed two-thirds full in the basket—overcrowding creates steam pockets that prevent proper crisping.
Door Swing and Clearance Requirements That Impact Depth
The TOA-60’s dropdown door design affects your counter depth planning more significantly than many users anticipate:
Door Operation Details You Must Account For
- Hinge location: Bottom edge of the unit—creates a stable landing surface
- Door thickness: Adds 3-4 inches when fully lowered—critical for counter depth
- Open position: Functions as a convenient tray holder during food transfer
Counter Depth Calculation Formula
Minimum counter depth needed: 18 inches total
– 15.5 inches (unit depth)
– 2.5 inches (minimum door clearance)
Critical placement tip: Position the TOA-60 at least 6 inches from any backsplash to prevent door interference and allow easy cleaning behind the unit. This spacing also prevents accidental scorching of wall surfaces during extended use.
Ventilation Space Requirements for Safe Operation
Proper airflow prevents overheating and extends your appliance’s lifespan. The TOA-60 requires specific clearances that many users overlook:
Required Clearances Checklist
- Rear: 2 inches minimum from wall—essential for exhaust ventilation
- Sides: 2 inches each side—critical for convection air intake
- Top: 6 inches from upper cabinets—prevents heat damage over time
- Front: Unrestricted space—needed for full door operation
Safety warning: Ignoring these clearance requirements can trigger automatic shut-off during cooking, especially when using high-temperature air fry settings for extended periods.
Power and Cord Considerations That Affect Placement
The TOA-60’s electrical requirements impact your placement decision beyond simple dimensions:
Electrical Specifications You Must Verify
- Cord length: 36 inches (3 feet) from rear outlet—shorter than many expect
- Plug type: Standard North American 3-prong—requires grounded outlet
- Circuit requirement: Dedicated 15-amp circuit recommended—shared circuits may trip
- Wattage draw: 1,800 watts maximum—high power consumption during heating cycles
Placement strategy: Measure from your available outlet before selecting a location. The TOA-60 must sit within 3 feet of a grounded outlet—extension cords are unsafe due to the high wattage requirements.
Size Comparison to Other Air Fryers for Informed Decisions
Understanding the TOA-60’s size class helps set realistic expectations for counter space commitment:
Market Position Analysis
- Category: Large-capacity countertop convection toaster oven—more versatile than pod-style units
- Comparable models: Similar footprint to Breville Smart Oven Air Fryer Pro
- Versus pod styles: Nearly double the footprint of basket-style air fryers
- Weight comparison: 21 lbs vs 10-14 lbs for smaller single-basket units
Decision factors: Choose the TOA-60 if you have 250+ square inches of available counter space, value multi-function capability over minimal footprint, regularly cook for 3-6 people, and prefer oven-style access over basket shaking.
Shipping and Unboxing Considerations You Should Plan For
The retail packaging adds significant bulk beyond the unit dimensions:
Package Specifications for Delivery Planning
- Box dimensions: 19 × 18 × 16 inches—wider than the appliance itself
- Shipping weight: 23-25 pounds including all materials—requires two hands for safe carrying
- Dimensional weight: 31 pounds for shipping calculations—may affect delivery costs
Delivery tip: Ensure doorways and hallways accommodate the 19-inch box width. The substantial packaging weight may require two people for safe carrying upstairs or through tight spaces.
Final Space Planning Checklist Before Purchase
Before clicking “buy,” verify these measurements in your kitchen with a tape measure:
- [ ] 16 inches of available counter width (with 2-inch side clearance)
- [ ] 18+ inches of counter depth (including door clearance when open)
- [ ] 20+ inches of vertical clearance (14″ unit + 6″ ventilation space)
- [ ] Within 3 feet of a grounded electrical outlet
- [ ] 2+ inches clearance on sides and rear for ventilation
- [ ] Location allowing door to fully open without obstruction
The Cuisinart TOA-60 air fryer dimensions and size represent a significant counter commitment, but the payoff in cooking versatility makes it worthwhile for many households. Armed with these precise measurements, you can confidently determine whether this multi-functional appliance will fit your kitchen layout and lifestyle needs. Measure twice, buy once, and enjoy perfectly crispy results without the spatial regrets that plague many new air fryer owners. Your future self will thank you when you’re effortlessly cooking family meals without rearranging your entire kitchen.
